Not as much to post about the past two weeks as I have been out of commission after hurting my back badly when I tripped and fell last week and aggravated the four cracked discs I have had from a nasty motorcycle accident over 25 years ago. But the spasms are lessening each day since and just a matter of time before I’m back to just the usual back ache which is my normal state.
No complaints from me though as we continue to enjoy taking our time to weave our way generally north through some of the hundreds of postcard like Bahamian islands.
When I left off in the last post we were in Red Cut Cay and after a few days there we continued up and anchored at Black Point then on to Allen’s Cay and then a very neat fully enclosed very tiny little bay on Royal Island as seen here on our chart plotter.
This will give you a better perspective on how small the entrance was and if you click on the photo I have circled in RED the two short pieces of white PVC pipe that marked each side.
Captain Christine guided us through as she put the entrance in our wake and ……
…… I soon had the anchor down into the sandy bottom 2.5m/8ft below and we were soon enjoying our very own little anchorage with wine up in the SkyBridge. THIS is why we worked on the design so hard with Dennis to have the least draft possible; 1.3m/4.4 ft
After Royal Island we made our way over to Lynyard Cay where we anchored for four days and had a chance to meet up with some sailing friends Mark & Shawnae who were anchored nearby on their latest boat s/v Big Sky Blue Waters (they hail from Montana). Difficult to show on maps as most of these spots are too small to show up but you can get a rough idea of our route and anchorages along the way. We are now anchored up near the north end of Great Abaco Island just off of Coopers Town.
There is a storm front coming through this weekend with winds out of the West and South rather than the usual Easterlies so we’ll wait out here for that to pass and then make our way West as we get ready to jump off and cross over to West Palm Beach area in Florida in the next week or so.
That catches you up on our most recent travels and anchorages and now I thought that something a bit different might be of interest to many of you. Read on to see what you think and let me know your thoughts with comments in the “join the discussion” box at the end please.
Year in Review: Top Features We Like Most and Least on Möbius
Hard to believe but we started writing this Mobius.World blog back in March 2018 so we’ve just passed the five year mark for that and the primary motivation for creating and writing the 262 posts since then has been the hope that sharing our experiences here provides a good way for us to “pay it forward” for all the other people who went before us and shared their experiences from which we learned SO much. In keeping with that hope, as the calendar turns over to May (how did THAT happen so fast??) we have been actively cruising Möbius for one year now. Also on the hard to believe list is that our log book shows that we have just ticked over 7300 nautical miles (8400 miles/13,520 Kilometers) and most of that in just the last six months since leaving Turkey at the end of October. Last year we were in and out of a number of marinas so we have been through our share of Med mooring, docking, fueling up and the like. This year we’ve been on anchor every night for the past four months in quite a variety of conditions, bottoms and weather. We’ve done everything from short day trips, lots of overnight passages and some longer ones such as our trans Atlantic crossing of 14 days. With these cumulative experiences I thought now would be a good time to reflect on what we have learned over the past year about what is working out best for us as well as what has not worked so well and we would change or do differently to make Möbius even better. I will write this up as two blog posts grouping what’s worked best into one and then a second with what changes we would make to follow. In my experience I have found that first hand experience from others has proven to be the best and most useful for making my decisions and so I hope these twin posts will do likewise for some of you.
A few caveats before I go any further:
- All of the points I’ll be covering are simply what has worked so well or not for us and our use cases with no suggestion that these would be best for other owners, boats and use cases.
- There is no implied order or ranking of these items, simply a list.
- Any mention of specific products is done for clarity only, these are not endorsements and we have no sponsors or affiliations with any of the products mentioned.
- In the years of posts here on this blog, I have provided lots of detailed coverage, too much perhaps, of each of these items during the build so in this posting I will just be listing the reasons why each item is on the list. If you are interested in more details you can refer to these previous posts and I’ll provide links to some of these.
OK, with that out of the way, let’s jump right into our top favorite features on Möbius.
Starting up at the Bow, our whole anchoring system has proven to be eXtremely strong, reliable and easy to use and has perhaps contributes more than any other system to our SWAN factor that enable us to Sleep Well At Night in every anchorage in all conditions. The “SideWinder” mounting of the anchor off the Port side of the Bow which Dennis and I designed, has proven to be a great setup eliminating the anchor and roller assembly from sticking out over 1m at docks and keeps it very securely pressed against the hull in pounding seas with nary a sound or any movement.
The primary components of our Anchoring System are
110Kg/242lb Rocna anchor
100m/330ft of Galvanized DS40 13mm chain
Maxwell windlass VWC4000 w/Maxwell controls at both helms and wired remote in forepeak
Lewmar Deluxe Heavy Duty Chain Stopper 13mm chain
Lewmar EVO 55 Self-Tailing Winch for kedging
The chain all stows inside of a round aluminium chain bin inside the forepeak which has worked out eXtremely well as there is no “castling” of the chain as it is stowed.
and any anchor mud and muck that gets in there is easily flushed out through the drain in the bottom that exits out the side of the hull just above the waterline.
Once the anchor is set we attach a 25mm/1″ nylon snubber line using a loop of Dyneema with a slip knot that goes through one link on the chain. This takes seconds to attach or remove and the snubber from the chain and absorbs of any shock loads on the anchor chain and eliminates any chain noise into the boat.
Letting the chain out until the snubber is taking all the tension the line comes up through the large round “nose cone” in the very front of the Bow and ties to the Samson post. Leading the snubber line through the center of the Bow reduces side to side swinging at anchor and the hyperbolic curve machined on the inside of the sold AL snubber cone prevents chaffing of the line which still shows no sign of chaffing after over 150 nights at anchor so far. The large degree of forward slope of the anchor deck also worked out great making it easy to hose down with all the debris draining out the nose cone back into the sea.
All together this is a super dependable and easy to deploy/retrieve anchor system that sets first time every time and resets immediately on severe wind shifts. Depends on water depth of course but typically we have about 30m/100ft of 13mm anchor chain out which adds an additional 120kg/265lbs to the 110kg/242lbs of anchor on the bottom so we SWAN very well every night and is definitely one of our favorite systems!
Foul Release silicone bottom paint
Our last minute decision to go with silicone based “Foul Release” bottom paint instead of CopperCoat has turned out to be one of THE best decisions we made. This Foul Release type of bottom paint never ceases to amaze me with how it prevents almost anything from growing on it and what might be there after months of sitting still comes off completely with a simple wipe with a sponge or cloth to bring it back to like new. We used the International version called InterSleek 1100SR but several other manufacturers such as Hempel “Silic One” are also available.
This paint has been in the water for over two years now and it still cleans up completely with just a sponge or cloth if we’ve been sitting at anchor for a long time and currently shows no sign of wear or age. It is supposed to be good for 5-7+ years and so far looks like it will achieve that easily which would be a HUGE benefit in terms of efficient hull speeds and no costly annual haul outs. I can’t say for sure but I think that having such clean and slippery silicone hull surface contributes to our overall hull efficiency, speed and great fuel burn rates. What’s not to like??!!
Open and Accessible system installation
All of the system components, wiring and plumbing were given dedicated locations with completely open access. This reduced the time for initial installation during the build but more importantly continues to put a smile on my face every time I need to do any work or maintenance on any of the systems as everything is easy to access and mounted at a just right height for working on.
Here in the Basement for example you can see how all the components such as all the 14 MPPT controllers on the Left and the three 240V Victron Multiplus inverter/chargers on the Right, are all mounted such that when I’m kneeling or sitting in front of them they are at the just right height right in front of you to see and work on.
Same story back in the Workshop area where all the major components on the Right such as the DC Distribution box, Kabola diesel boiler, watermaker and AirCon chiller system are mounted on top of the shelves to put them at just right height as well.
At the far end, the front of the Day Tank has been used to mount all the fuel filters, Alfa Laval centrifuge and fuel transfer valve manifolds are out in the open and at perfect height when standing in front of them.
Underneath that shelf the electrical wiring, external rectifiers and water distribution manifolds are also open and easy to access.
All of the plumbing is similarly open and easy to access such as this manifold with valves for all the cold water consumers in the Master Cabin.
One of our four primary principles for the design and build of Möbius was Low Maintenance and having all the components, wiring and plumbing open and so easily and comfortably accessed has been a big factor in achieving this goal throughout the whole boat.
As we did for all the major components, we took a “systems” approach to the propulsion system from front of the engine to the prop. coupled to a Nogva Controllable Pitch Propeller (CPP) is also way up at the top of our list of favorite features on Möbius.
Our choice of a Gardner 6LXB engine aka Mr. Gee,
coupled to a Nogva Controllable Pitch Propeller (CPP) via a Nogva HC-168 2.95:1 reduction gearbox is also way up at the top of our list of favorite features on Möbius.
The combination of the slow revving engine and lack of any transmission shifting created a seamless and smooth propulsion system. This was our first experience with CPP and it did take some time to learn how to run a boat where you first set the throttle at the RPM you want and then don’t touch it and just use the Pitch lever to increase pitch through an infinite range from zero/neutral to maximum pitch for the load and speed you want. With no shifting involved to go from forward to reverse it is eerily quiet and smooth when docking and when underway we essentially run the boat based on the EGT or Exhaust Gas Temperature meter to get the just right pitch for any speed we want.
We cruise between 8.5-9 knots and after 7300 nautical miles our overall propulsion efficiency has us averaging about 1.85 L/NM @ 8.5kts which we are eXtremely pleased with.
The dedicated “propulsion room” is another of my most favorite design decisions as it similarly provides open and easy access to Mr. Gee and all his components,
….. as well as the Nogva gearbox, coupling and Tides Marine dripless prop shaft seal. I am able to stand, sit or kneel on the grated composite flooring on all sides and with a full meter of width all around and each grate can be easily lifted out of the way to provide access underneath if needed. Having a dedicated engine room with nothing but the engine inside keeps everything inside easy to see and work on, easy to keep well ventilated and all the other components typically found in engine rooms such as fuel filters, batteries and system components are kept OUT of this environments heat and vibration. More examples of how well the open and accessible systems design is one of our favorite features.
Layout (cabin locations, balance living vs functional, up/down)
The overall interior layout also makes it way to the top of our favorite aspects of live aboard Möbius. For us it has the Goldilocks balance between amount of living space vs functional systems space and our decision to have a very large forepeak up front and then an even larger engine room/workshop space in the rear has resulted in a great layout as well as keeping these spaces completely separate with their own dedicated access so you never need to go through a living space area to get to something in the forepeak or engine room or workshop.
The vertical layout has also worked out eXtremely well for us with each cabin a few steps below the SuperSalon and the SkyBridge up above. One of the most useful features of our layout is having an enormous “Basement” area below the floor of the SuperSalon. We designed this to be 1.2m/ 4ft high such that you can easily move around by bending over and not hit your head on anything and then sit or kneel to access any of the equipment mounted on intermediate floor to ceiling walls or access any of the many storage bins and shelves in the Basement.
The stairs leading down into the SuperSalon from the Aft Deck on the Left and then around to the stairs down into the Ships Office and Guest cabin on the Right provide excellent access between all these areas.
Very difficult to photograph but hopefully this pano shot of the SuperSalon will help convey why we like this layout with the 360 degrees of glass so much.
We knew we wanted a Flybridge overtop of the main Salon or House so this was part of the design from the beginning but I don’t think either of us appreciated just how much we would enjoy this feature and how much time we would spend up here both when at anchor and underway.
Part of what makes this space work so well is our decision to put the Upper Helm at the Aft end of the SkyBridge. As we’ve done in several areas of the boat we have created an initial prototype for the seating in this SkyBridge Lounge area by using patio furniture which we rearrange from time to time to figure out what will work best longer term. So far this L shaped layout has worked out best.
There are great sight lines when sitting in the Helm chair just outside this photo on the far Left and yet still takes full advantage of the height for sight lines through the 360 degrees of windows that surround this entire space.
The Bow and the side rub rails are all fully visible from the Helm chair.
The roof overtop of the outdoor galley down on the Aft Deck does prevent a direct view of the transom but otherwise the sight lines Aft are great and we have a camera that displays a birds eye view of the transom on the Helm displays if needed when backing into a dock.
The Helm down in the SuperSalon duplicates the Upper SkyBridge Helm.
But unless the weather is very cold or wet we much prefer to run the boat from the SkyBridge with its added height and even better visibility.
At anchor it also makes a great office space and a comfy bed for naps and off watch time as well. So the SkyBridge definitely makes it onto our top favorites list.
Hot Water & Heated Floors
Another example of the advantages of taking a Systems approach is our Domestic Hot Water system or DHW and probably fair to say that the heart of our DHW system that puts his solidly on our top favorites is our decision to install a Kabola diesel fired boiler. Located with all the other system components in the Workshop it is out of the way yet easily accessible.
The 75L Kabola boiler is our primary source of DHW as it circulates through one of three heat exchanger circuits in our Calorifier that stores all our hot water as can be seen in this cutaway demo. The second heat exchanger circuit routes hot water from our Gardner engine and so whenever we are running the boat this provides all our hot water instead of the Kabola boiler. The third heat source is a 240V electrical heating element which we can use if the water based heat exchangers should ever fail.
However the one feature of our DHW that truly steals the show in cold weather is mostly invisible and that our Heated Floors. Underneath the vinyl flooring in all the living spaces there are circuits of plastic PEX tubing that circulates hot water and provides a creature comfort in colder climates that is difficult to adequately describe in words. A detailed description of the whole heated floor system can be found HERE in this previous blog post.
As you can read in that more detailed blog post, this is quite a simple system really but does take a bit to get your head around how it works as this is all part of the overall domestic hot water system so that all the water flowing through the floor PEX is coming from the Calorifier in the Basement circulating the same water as distributed to all the sinks and showers on the boat. No valves to adjust or turn on/off it all works by virtue of how this “Open Direct” plumbing design dictates.
Overtop of the PEX tubing and rigid foam, these industrial vinyl floor planks provide a fantastic floor in all weather conditions and are specifically made to work well with heated floors. Critical for our use on a boat, these vinyl floor planks have a simulated wood grain texture molded in which has proven to be completely skid proof even with wet feet and any spills clean up easily. After two years of rigorous use these floors show zero signs of wear or marks which helps keep them on our top favorites list.
There are three independent zones for the two cabins and the SuperSalon and each is controlled by one of these easy to set thermostats which maintain whatever temperature you want.
The manifolds and pumps are mounted down in the Basement up against the Aft bulkhead and yet another example of how easy this whole system is to access.
Battery & Solar Based Electrical System
Yet another systems approach on our top favorites list is our overall Electrical system. It is “battery based” in that all four voltages; 12V + 24V DC and 120V + 240V AC comes from our 1800Ah @ 24V House Battery bank. AC is created via the 5 Victron MultiPlus inverter/chargers and the DC is provided via three DC distribution boxes; Central Main in the Basement plus one in the Forepeak and one in the Workshop for the high amperage circuits there.
Solar is our primary source for recharging the house batteries most of the time but when we are underway the two massive 250A x 24V Electrodyne alternators with WakeSpeed 500 regulators provide up to 9KW of power and we also have the option of connecting to shore power whenever we are in a marina.
There are eight 320W solar panels that form the roof of our SkyBridge as seen in the photo above and then three more mounted on top of the cantilevered roof over the Outside Galley on the Aft Deck as seen here.
And then three more mounted in a hinged frame in front of the SkyBridge. These 14 solar panels add up to just over 4kW of potential power and most days our battery monitors show an actual input of between 1kW during the winter months and up to over 2.5kWh of power during summer hours.
Each solar panel has its own MPPT controller which are mounted in the Basement and feed into individual circuit breakers for further control as seen here. Having a dedicated MPPT for each panel reduces the impact of any shading on any panel and helps with the overall performance of our solar system.
This screen shot from our Victron VRM display shows a summary for our solar output vs electrical consumption so far in 2023.
And this summary of the past 2 days, April 28+29 2023 lets you see how it varies throughout a 24 hour day.
We have not been in a marina or connected to shore power in the past four months and the combination of solar and alternator power is keeping our batteries 100% charged every day and so easily makes it onto our favorites list!
Handholds Everywhere for Everyone
Safety was another of the four design principles we had and one example that has proven to be a big favorite is the way we were able to ensure that there were super solid hand holds for EVERY person onboard from children to adults.
On the exterior the handholds are all 30mm diameter thick walled AL pipe such as these on the aft end of the house roof near the Aft Deck. These pipe handholds also make for eXcellent strong points for fastening things with Dyneme and other lines.
Perhaps one of the most important spots for handholds is along the side decks when you are moving between the Fore and Aft Deck areas. On the left you can see the continuous length of AL pipe that runs along the entire edge of the house roof and then the three rows of Dyneema landlines that Christine rigged between each of the sturdy vertical AL stanchion pipes. The top lifeline is 1 meter above the deck so hits most adults about waist height which ensures that even if you were to be thrown against these you would be stopped and not flipped over top.
Up at the Bow there is a very solid set of AL pipe railings that wrap all the way around and make this area extremely safe and fun spot to be for dolphin watching or just dangling your feet overboard and taking in the scenery at anchor or underway.
At the far end of the Aft Deck there are solid AL pipe railings for the corner of the deck before the stairs going down to the Swim Step and then a solid AL pipe railing on the other side of the steps.
In the Engine Room, Mr. Gee has a full set of AL pipe railings wrapped around him to ensure you can’t be tipped over onto him in rough seas and these have worked out very well to also provide good support as you are leaned over working on various parts.
On the interior of the boat one of our favorite esthetic features of the gorgeous Rosewood cabinetry is the design we came up with to incorporate built in hand holds to the design that are located on all the cabinets in all the cabins and SuperSalon. This example is on the corner of the Galley cabinet across from where the fridges are located.
These solid Rosewood edges wrap around the whole boat to form what we call our “Blue Horizon Line” and their key feature is that they have a deep groove that is at about waist height where your fingers naturally slip in to provide an eXtremely secure hand hold. We have had our grandchildren onboard several times now and these have worked out as designed to be at Goldilocks height and size for their fingers too.
Possibly saving the best for last, something that brings us joy every day is the choice of interior materials we made.
The Rosewood we chose for all the cabinetry really steals the show and this shot of the Galley cabinets will give you some idea.
We were very fortunate that Naval Yachts happened to have their very best cabinetmakers throughout the entire build and they were a joy to work together with to produce details such as how all the grain is bookmatched such that it literally flows from one piece to the next.
This was made possible because after months of searching we were able to purchase an entire flitch of Brazilian Rosewood that had been flat cut from the same log.
As each slice comes off they stack these in order and therefore the grain of each slice follows the next.
The other key was finding a matching stack of solid Rosewood that would be used to build the frames and every edge of every panel. NO veneer edging allowed!
Unlike more typical construction, all plywood edges had these T shaped pieces of solid Rosewood glued in place and then the veneer was applied AFTER so that it overlapped the solid wood edging.
What this does is ensure that there are no glue joints exposed and they become invisible as they gradually transition from veneer to solid. When these panels would be used for a corner of a cabinet, a thick piece of solid Rosewood was glued glued on and then this solid edge was rounded over in a shaper to create a large radius corner
The Rosewood was more than 11X the cost of any other hardwood so to help stretch the prized solid pieces it was sometimes possible to glue on a piece of cheaper hardwood like this and then round the Rosewood for the corner.
For the very large radius corners, strips of solid Rosewood were edge glued up and then radiused like this.
Or like this.
When combined with the Turquoise Turkish marble and the inset Blue Horizon line strips, the end result was well worth the extra time and expense to build.
We carried the same combination of materials throughout both cabins, Salon and Galley and I hope these few photos help you see why this puts a smile on our faces every day.
There is a LOT more that we like about our dear Möbius and she has definitely lived up to being “Project Goldilocks” by being just right, just for us but the above items hit upon most of our top favorite features and I hope this review was worthwhile. Of course there is always the other end of the spectrum and so in the next blog post I will follow up by reviewing things that have not worked out as well or are things we want to change so do stay tuned for that.
Thanks John, glad you liked part one and I’m working on the next installment now.
Wayne and Christine – I know we don’t converse much but Sebrina and I do follow your journey and this Blog sets it off nicely. 5 years of hard work is a one way trip for all of us in our lives and to see it come together is truly a fantastic read. Being the first is never easy and believe me when we freely acknowledge we have learned so much from your own experiences and willingness to share. That knowledge is built in to our own hull due for launch at the end of June this year. There is a lot you will recognize. I leave for Turkey in 3 weeks for that event. Bravo both of you.
Really appreciate you taking the time to send such generous comments Chris & Sabine and we’re delighted that you found some of our posts to be helpful in your build of XPM78-02 Vanguard. All the more impressive that you made the time during such a hectic phase of your build as you prep for the big launch day. We remember that phase well in our process and we’ll be keeping a close eye on your blog posts for your updates from Turkey and send our best wishes that all goes well in these final days and as you have Vanguard in the water.